|
|
| PACKING
HANDING CONVEYOR BELT |
| |
| Rough
top belting |
|
| APPLICATION : |
|
Rough Top belt is designed for transporting light weight
goods, either being inclined or being horizontal, also
suitable for transporting fragile or deformed materials
and packed goods, such as glass, papers, bags, boxes
or cartons at angle from 15 to 35
degree. |
|
 |
|
| |
| FEATURES : |
| 1. |
The bareback Rough Top belt makes less friction
coefficient, suitable for running over table and flat panel.
|
| 2. |
The design of mesh-like pattern on the
top surface cover can generate the relief effect, absorbing
any vibrations and impacts exerted on the materials conveyed
and simultaneously preventing the material from slip. |
|
| CONSTRUCTION and PROPERTIES: |
| 2 or 3-ply construction with cut edges and
a carcass of synthetic EP fabric. |
| The surface texture resists the tendency for
the material to roll back down the conveyor. |
| The black top cover is recommended for utility
type incline service while the tan cover is suggested for transporting
packaged food products where an odorless, nontoxic, non-marking
belt is a necessity. |
| Top cover is a full 1/8กจ thick SBR and
the back is protected by either a durable friction surface bottom
or a synthetic bareback for slider bed applications. |
| |
| Permissible Inclined
Angle |
| Materials |
Angle |
| Jute sacks ( Bag) |
35 |
| Good packed in paper |
32 |
| Wooden Case |
30 |
| Cartons |
28 |
| Salt of powder |
27 |
| Wheat of bulk |
26 |
| Boxes of synthetic material |
25 |
| Good packed in plastics |
22 |
| Soy Bean (Bulk) |
20 |
|
 |
 |
|
Our R.T.
Belt Standard Specification:
|
| Standard Width |
No.of ply |
Top cover |
Bottom Cover |
Standard Length |
Color |
|
1350 mm ~
1500 mm
|
2ply |
1/8" R.T. |
Bareback |
200M Per Roll |
Black or Tan |
| 2ply |
1/8" R.T. |
1/16" |
| 3ply |
1/8" R.T. |
Bareback |
| 3ply |
1/8" R.T. |
1/16" |
| Max. material temperature 80oC |
|
|
|
