|
|
|
|
| |
| Multi-Ply Fabric Conveyor
Belts |
| Have three or more fabric plies in the carcass. The
necessary strength and stability is secured by using sufficient
number of fabric plies in the carcass. |
|
| Belt
Construction : |
| Top
Cover : |
Any thickness from 1/32" to 1" |
| Carcass
: |
1 to 6 plies or more |
| Skim
: |
From 1/32"~ |
| Bottom
Cover : |
Any thickness from 1/32"
to 1" (Bareback also is available) |
|
 |
|
Range of
Production :
|
| Fabric
: |
EP, NN or Cotton |
| Tensile
Strength : |
100~3000 kgf/cm |
| Belt
Width : |
300mm~1600mm |
| No.
of Ply : |
1~6 plies |
| Overall
thickness : |
3mm~50mm |
| Edge
: |
Cut or Mounded Edge |
| Max.
Length : |
Roll Diameter not exceed 2.6M |
|
|
| |
| General
Abrasion Resistant Purpose |
| Classification
and Application of Conveyor Belting |
|
| For general application, probelt assorts four kind of grades
for customer's requirement. Firstly Grade S 150 the most economic
one, is designed for those light duty application, ususally
for conveying materials with moderate abrasion and small size.
In addition, considering heavy duty application and good resistance
to abrasion, ozone, cutting, and gouging, Grade S180, S240 are
the best option for you to make, but how to correctly choose
one of either, please refer to page 7 for full details. In final,
SAR90 is recommended for applications where severe abrasion
is the top concern, like materials with heavy and sharp. |
|
|
|
|
