|
|
|
|
Application:
|
|
| It is composed of rubber belt and elevator-bucket,
which need the belt with high strength and low elongation in
service. Buck Elevator Conveyor Belt is applicable to transport
vertical loose powdery materials of usually not more than 50mm
in diameter,diameter, such as, crushed limestone, sand, gravel
,cement, grain,etc. |
|
Elevator Belt Tips:
|
| They are liable to break due to the bolt setting holes, distributed
along the entire belt length for fitting the buckets. In addition,
these belts, different from ordinary belts, are subject to various
forces including lever action due to projection of the buckets
and the extracting force exercise by pulleys at the time of
belt bending. So for elevator service, you need to calculate
the strength of the belt needed to support the weight of the
bucket and the material being conveyed. |
|
| Standard
Specification: |
Carcass:
|
EP or Cotton Duck |
| Tensile Strength: |
100~2,400 N/mm |
| Belt Width: |
~ 1500mm or 60" |
| Cover Rubber: |
Resistant to wear, oil, heat and flame; also cover-less type
(FS) |
|
| Feed Type: |
|
 |
| Scoop Feed |
Fly Feed |
 |
 |
|
|
|
Application:
|
 |
Used where the belts run on steel, wood or some
other low-friction surface (sliding bed), and for belts with
low friction back and top cover. These belts allow easy scraping-off
of parcels, sacks and other items
|
|
|
